Журнал «Радиотехника» | Издательство РАДИОТЕХНИКА

V.I. Biryuk - Ph.D. (Eng.), Moscow Institute of Physics and Thechnology; Chief Research Fellow; Central Aerohudrodynamic Institute. E-mail: v_biryuk@yahoo.com
Nguyen Hong Phong - Post-Graduate Student, Moscow Institute of Physics and Thechnology. E-mail: loicuagio100884@yahoo.com

New technologies of receiving high-disperse powders for composite products ECB

K.A. Amelicheva  Ph.D. (Eng.), Associate Professor, Bauman Moscow State Technical University, Kaluga Branch
V.P. Gatsenko  Ph.D. (Eng.), Professor, Head of Department, Rostov State Academy of Agricultural Engineering
V.P. Marin - Dr.Sc. (Eng.), Professor, Moscow Technical University of Radiotechnics, Electronics and Automatics (MIREA)
I.V. Fedoseev  Dr.Sc. (Eng.), Professor, Bauman Moscow State Technical University, Kaluga Branch
T.S. Nikolaeva  Post-graduate Student, Bauman Moscow State Technical University, Kaluga Branch. E-mail: fn2kf@list.ru

An evaluation of influence of composite material anisotropy on design load reduction for the unmanned aerial vehicle

V. I. Biryuk - Ph.D. (Eng.), Associate Professor, Lecturer, Department of Aircraft Strength, Moscow Institute of Physics and Technology (State University), Chief Research Scientist, Central Aerohydrodynamic Institute. E-mail: v_biryuk@yahoo.com
H. Ph. Nguyen - Post-graduate Student, Department of Aeromechanics and Flight Engineering, Moscow Institute of Physics and Technology (State University). E-mail: loicuagio100884@yahoo.com

Special aspects of designing and development of radiotransparent radomes and protective covers for operation in centimetric and millimetric wave bands

S. I. Shalgunov - Ph.D. (Chem.), Head of Department of VNIISPV, OJSC "NPO Stekloplastic" V. I. Sokolov - Dr.Sc. (Eng.), Director of VNIISPV, OJSC "NPO Stekloplastic" E-mail: vniispv@mail.ru I. V. Morozova - Research Scientist, OJSC "NPO Stekloplastic" Yu. S. Prokhorova - Research Scientist, OJSC "NPO Stekloplastic"

Technological and economic techniques to improve production efficiency and quality assurance of electronic components

A.P. Korgavyi - Dr. Sc. (Eng.), Professor, Kaluga branch of the Bauman MSTU. E-mail: fn2kf@list.ru V.P. Marin - Dr. Sc. (Eng.), Professor, MIREA (Moscow) V.P. Savchenko - Dr. Sc. (Eng.), Professor, General Director, JSC «A.L. Mints Radiotechnical Institute» (Moscow). E-mail: asavchenko@rti-mints.ru A.V. Chelenko - Post-graduate Student, Kaluga branch of the Bauman MSTU. E-mail: fn2kf@list.ru

Methodology for calculating the strength characteristics of composites

Yu.S. Belov - Ph. D. (Phys.-Math.), Associate Professor, Kaluga branch of the Bauman MSTU. E-mail: ybs82@mail.ru S.A. Ginzgeimer - Ph. D. (Phys.-Math.), Associate Professor, Kaluga branch of the Bauman MSTU. E-mail: ginzgeymer@mail.ru M.B. Loginova - Ph. D. (Phys.-Math.), Associate Professor, Kaluga branch of the Bauman MSTU. E-mail: loginovamb@gmail.com A.V. Ponomarev - Post-graduate Student, Kaluga branch of the Bauman MSTU. E-mail: palex@mail.ru S.V. Rybkin - Ph. D. (Phys.-Math.), Associate Professor, Kaluga branch of the Bauman MSTU. E-mail: sr@kaluga.net S.G. Gurov - Student, Kaluga branch of the Bauman MSTU. E-mail: gurovSG@gmail.com

Physical and technological factors to ensure the quality of composite materials obtained by rolling powders

V.V. Prasitskiy - Dr. Sc. (Eng.), Director of the Ltd. «Ekolyum-Voschod» (Kaluga). E-mail: sintel40@yandex.ru G.V. Prasitskiy - Student, Kaluga branch of the Bauman MSTU. E-mail: akatosh74@yandex.ru K.G. Nikiforov - Dr. Sc. (Phys.-Math.), Professor, Tsiolkovsky Kaluga State University. E-mail: kgn@kspu.kaluga.ru S.M. Zhdanov - Dr. Sc. (Eng.), Professor, Kaluga branch of the Bauman MSTU. E-mail: fn2kf@list.ru

The influence of microwave electromagnetic field on mechanical properties of composite materials

I.V. Zlobina - employee, Yuri Gagarin State Technical University of Saratov. E-mail: @irinka_7_@mail.ru N.V. Bekrenev - employee, Yuri Gagarin State Technical University of Saratov. E-mail: nikolaj.bekrenev@yandex.ru

Technology composite materials for advanced electronic systems

K.A. Amelicheva - Ph. D. (Eng.), Associate Professor, Kaluga branch of the Bauman MSTU. E-mail: aka2000@mail.ru A.N. Shmakov - Bachelor, JSC \"VOSHOD\"-KRLZ. E-mail: archangel SD@ya N.N. Unanian - Master, Kaluga branch of the Bauman MSTU. E-mail: n.unanyan@mail.ru L.N. Korol - Ph. D. (Eng.), Leading Process Engineer, JSC \"VOSHOD\"-KRLZ. E-mail: n.krlz@kaluga.ru

Robotic flaw detection system for part of polymer composite materials

R.A. Fayzrakhmanov - Dr.Sc. (Econ.), Ph.D. (Eng.), Head of the Department of Information Technology and Automated Systems, Perm National Research Polytechnic University. E-mail: fayzrakhmanov@gmail.com R.T. Murzakaev - Ph.D. (Eng.), Associate Professor, Department of Information Technology and Automated Systems, Perm National Research Polytechnic University. E-mail: rustmur@gmail.com R.R. Bakunov - Post-graduate Student, Assistant, Department of Information Technology and Automated Systems, Perm National Research Polytechnic University. E-mail: bakunov_roman@mail.ru A.S. Mekhonoshin - Post-graduate Student, Assistant, Department of Information Technology and Automated Systems, Perm National Research Polytechnic University. E-mail: akropag@mail.ru

Calculation and analysis of fractal characteristics hierarchially structured composite model

D.V. Terin - Ph.D. (Phys.-Math.), Associate Professor, Yuri Gagarin State Technical University of Saratov E-mail: terinden@mail.ru S.A. Korchagin - Post-graduate Student, Yuri Gagarin State Technical University of Saratov E-mail:korchaginser@gmail.com

Results of design of the radio-transparent fairing of the onboard satellite terminal of an unmanned aerial vehicle with long flight duration. Part 1. Analysis of the main factors influencing the aircraft radio-transparent fairing design

D. G. Pantenkov1, S. I. Shalgunov2, A. T. Egorov3, A. M. Vorobyev4, V. A. Koltsov5
1, 3, 4 JSC «Kronstadt» (Moscow, Russia)
2, 5 JSC «Scientific and production association Stekloplastic» (Solnechnogorsk, Russia)

Comparison of microwave diagnostics with other non-destructive testing methods for composite products

А.S. Bugaev – Dr.Sc. (Phys.-Math.), Professor, Academician of RAS, Head of Department,

Moscow Institute of Physics and Technology (State University)

S.I. Ivashov – Ph.D. (Eng.), Head of Laboratory,

Bauman Moscow State Technical University

E-mail: sivashov@rslab.ru

V.V. Razevig – Ph.D. (Eng.), Senior Research Scientist,

Bauman Moscow State Technical University

Е-mail: vrazevig@rslab.ru

М.А. Chizh – Ph.D. (Phys.-Math.), Senior Research Scientist,

Bauman Moscow State Technical University

Results of design of the radio-transparent fairing of the onboard satellite terminal of an unmanned aerial vehicle with long flight du-ration. Part 2. Radiotechnical characteristics and computer simulation re-sults

Results of design of the radio-transparent fairing of the onboard satellite terminal of an unmanned aerial vehicle with long flight du-ration. Part 3. Results of field testing and experimental studies of radio technical characteristics

Development of a disassembly reflector design based on composite materials

A.V. Soldatov1, A.A. Ikonnikova2, R.G. Batrutdinov3

1,2 JSC «NPP «Radiosviaz» (Krasnoyarsk, Russia)

3 Intrum LLC (Krasnoyarsk, Russia)

2 sushininaa@bk.ru