350 rub
Journal Science Intensive Technologies №9 for 2015 г.
Article in number:
Physical and technological factors to ensure the quality of composite materials obtained by rolling powders
Keywords:
electronics
composite materials
and molded frame pseudoalloys
the thermal coefficient of linear expansion
heat sink elements
Authors:
V.V. Prasitskiy - Dr. Sc. (Eng.), Director of the Ltd. «Ekolyum-Voschod» (Kaluga). E-mail: sintel40@yandex.ru
G.V. Prasitskiy - Student, Kaluga branch of the Bauman MSTU. E-mail: akatosh74@yandex.ru
K.G. Nikiforov - Dr. Sc. (Phys.-Math.), Professor, Tsiolkovsky Kaluga State University. E-mail: kgn@kspu.kaluga.ru
S.M. Zhdanov - Dr. Sc. (Eng.), Professor, Kaluga branch of the Bauman MSTU. E-mail: fn2kf@list.ru
Abstract:
Among the products of electronic components, intended for the development and production of the vacuum, and discharge of semiconductor devices, a significant number of them are made from powders of metals and dielectrics, as well as in the form of nanoparticles and multilayer nanostructures.
An important part of these products constitute a heat sink elements derived from pseudo-type molybdenum-copper and tungsten-copper. This paper examines the reasons for the backlog parameter pseudoalloys materials principally by domestic production potential. It describes the current method of mass production pseudoalloys materials as well as the method used in this study. Showing and illustrated defects appear in this method. On the causes of these defects in terms of the physical phenomena occurring in the manufacture of pseudoalloys. It also includes the principle of calculating the minimum possible porosity when using this method. The data on the Exploration of detailed physical and technological factors affecting the quality of the heat-diverting elements derived from the powder by its rolling and heat treatment.
Pages: 38-46
References
- Korzhavyi A.P. Advanced metallic materials for vacuum devices // Journal of Advanced Materials. 1994. T. 1. № 1. S. 46−48.
- Korzhavyjj A.P. Poroshkovaja metallurgija v materialosberegajushhikh tekhnologijakh izgotovlenija katodnykh uzlov IEHT // EHlektronnaja promyshlennost. 1986. № 3. S. 48−50.
- Fedoseev I.V., Korzhavyjj A.P., Maramygin K.V. Obrazovanie almazov i drugikh uglerodnykh faz pri destrukcii karbonilnykh klasterov palladija // ZHurnal neorganicheskojj khimii. 2013. T. 58. № 12. S. 1586.
- Korzhavyjj A.P., Loginov B.M., Loginova M.B., Belov JU.S. Issledovanie svojjstv polimernykh kompozicionnykh materialov na osnove uglerodnykh volokon i nanotrubok // Nanotekhnologii: razrabotka, primenenie - XXI vek. 2014. T. 6. № 1. S. 34−46.
- Korzhavyjj A.P., Marin V.P., Savchenko V.P., CHelenko A.V. Tekhnologicheskie i ehkonomicheskie priemy povyshenija ehffektivnosti proizvodstva i obespechenija kachestva ehlektronnojj komponentnojj bazy // Naukoemkie tekhnologii. 2015. T. 16. № 1. S. 40−46.
- Ponomarev V.A., JArancev N.V. Poroshkovye materialy dlja izdelijj ehlektronnojj tekhniki / Pod red. A.P. Korzhavogo. M.: Izd-vo MGTU im. N.EH. Baumana. 2014. 304 s.
- Injukhin M.V., Korzhavyjj A.P., Prasickijj G.V. Parametry i tekhnika poluchenija teplootvodjashhikh materialov dlja poluprovodnikovykh priborov // Naukoemkie tekhnologii. 2014. T. 15. № 2. S. 10−19.
- Ivanov O.G., Korzhavyjj A.P. Svojjstva amorfnykh magnitomjagkikh splavov tipa AMAG // Naukoemkie tekhnologii. 2002. T. 3. № 5. S. 24−28.
- Korzhavyjj A.P., Marin V.P., Reutov A.P. Perspektivnye napravlenija razrabotok materialov dlja vakuumnykh priborov // Naukoemkie tekhnologii. 2001. T. 2. № 4. S. 13−19.
- Bondarenko G.G., ZHdanov S.M., Korzhavyjj A.P. Osobennosti poluchenija i issledovanija platinovykh ehmitirujushhikh kompozicijj // Perspektivnye materialy. 1999. № 4. S. 19−25.
- Aitov R.D., Korzhavyjj A.P., Kristja V.I. Vlijanie zarjadki poverkhnosti na koehfficient vtorichnojj ehlektronnojj ehmissii kompozicionnykh katodov // Radiotekhnika i ehlektronika. 1995. № 11. S. 1692−1695.
- Nikiforov D.K., Korzhavyjj A.P., Nikiforov K.G. Vlijanie diehlektricheskogo nanosloja na ehmissionnye svojjstva struktur Al-Al2O3 i Be-BeO // Izvestija Rossijjskogo gosudarstvennogo pedagogicheskogo universiteta im. A.I. Gercena. 2009. № 79. S. 153−159.
- Asliddinova M.JU., Radzhabov T.D., Rasulov P.M., Korzhavyjj A.P. O mekhanizme uvelichenija ehlektricheskojj prochnosti vakuumnykh promezhutkov pri ionnojj obrabotke poverkhnosti ehlektrodov // Poverkhnost. Rentgenovskie, sinkhrotronnye i nejjtronnye issledovanija. 1983. № 9. S. 132−135.
- Prasickijj V.V. Nauchno-tekhnologicheskie aspekty proizvodstva kompozicionnykh materialov dlja teplootvodjashhikh i konstrukcionnykh ehlementov poluprovodnikovojj i vakuumnojj tekhniki // Naukoemkie tekhnologii. 2014. T. 15. № 10. S. 16−20.