K.A. Amelicheva - Ph. D. (Eng.), Associate Professor, Kaluga branch of the Bauman MSTU. E-mail: aka2000@mail.ru A.N. Shmakov - Bachelor, JSC \"VOSHOD\"-KRLZ. E-mail: archangel SD@ya N.N. Unanian - Master, Kaluga branch of the Bauman MSTU. E-mail: n.unanyan@mail.ru L.N. Korol - Ph. D. (Eng.), Leading Process Engineer, JSC \"VOSHOD\"-KRLZ. E-mail: n.krlz@kaluga.ru

Analytical studies related to the technologies of emitting composite materials production for advanced electronic systems have been conducted, primarily intended for the implementation of vacuum ultrahigh-frequency devices. It is shown that for the development and production of widely sought after magnetron devices composite emission sources are currently required produced on the basis of palladium and barium. A new technology for the production of composite tape Pd-Ba using the method of high-purity powders Pd-Pd5Ba rolling has been proposed and discussed, it also comprises smelting ingots Pd5Ba in vacuum, crushing and grinding of them using the methods of powder metallurgy and vacuum treatment on rolling machines. The thus obtained palladium - barium composite tapes according to the stability of parameters satisfy the obligatory requirements in vacuum ultrahigh-frequency devices.

 

1. Lee I.P., Maslennikov O.Yu., Roukhlyada N.Ya. Modification of the dispenser cathode surface with a pulse plasma // Fourth IEEE International Vacuum Electron Source Conference, IVESC 2003. Seoul. Korea. 2003. P. 313−314.
2. Korzhavyi A.P., Kristya V.I. On the calculation of cold cathodes lifetimes for helium-neon laser // Journal of Applied Physics. 1991. V. 70. № 9. P. 5117−5119.
3. Bolgov I.S. Korzhavyi A.P. Promising directions of development of tape metallic materials for electronics // Journal of Advanced Material. 1994. V. 1. № 4. P. 350−357.
4. Amelicheva K.A., Belova I.K., Bondarenko G.G., Korzhavyi A.P. On increasing the lifetime of tungsten-based cathode materials // Russian metallurgy (Metally). 2003. № 4. P. 376−381.
5. Dzhons V.D. Svojjstva i primenenie poroshkovykh materialov / Per. s angl. N.A. Bulenkovojj i dr. / Pod red. M.JU. Balshina i A.K. Natansona. M.: Mir. 1965. 360 s.
6. Balshin M.JU., Kiparisov S.S. Osnovy poroshkovojj metallurgii. M.: Metallurgija. 1978. 184 s.
7. Korzhavyjj A.P. Poroshkovaja metallurgija v materialosberegajushhikh tekhnologijakh izgotovlenija katodnykh uzlov IEHT // EHlektronnaja promyshlennost. 1986. № 3. S. 48−49.
8. Nikiforov K.G., Korzhavyjj A.P., Gorbachev V.V. i dr. Defekty i fizicheskie svojjstva mnogokomponentnykh ehlektronnykh materialov / Pod red. K.G. Nikiforova. Kaluga: Izd-vo KGPU im. K.EH. Ciolkovskogo. 1999. 215 s.
9. Ponomarev V.A., JArancev N.V. Poroshkovye kompozicionnye materialy dlja izdelijj ehlektronnojj tekhniki / Pod red. A.P. Korzhavogo. M.: Izd-vo MGTU im. N.EH. Baumana. 2014. 304 s.
10. Korzhavyjj A.P., Lishhuk N.V., Rozhanec A.V. i dr. Issledovanie processa formirovanija ehmissionnogo sloja kompozicionnykh katodov ehlektronno-opticheskimi metodami // EHlektronnaja tekhnika. Ser. Materialy. 1987. № 7. S. 13−17.
11. Bondarenko G.G., Korzhavyjj A.P. EHffektivnye ehmittery na osnove nikelja, palladija i platiny // Metally. 2000. № 4. S. 114−117.
12. Kapustin V.I., Korzhavyjj A.P. Fizika ehlektronnykh materialov dlja vakuumnykh mikrovolnovykh priborov // EHlektromagnitnye volny i ehlektronnye sistemy. 2016. T. 21. № 1. S. 42−52.
13. Korzhavyjj A.P., CHelenko A.V., Marin V.P., Savchenko V.P. Fiziko-tekhnicheskie i ehkonomicheskie aspekty obespechenija kachestva izdelijj radioehlektroniki // Kachestvo i zhizn. 2015. № 2(6). S. 38−44.
14. Korol L.N., Korzhavyjj A.P., Marin V.P. i dr. Fizicheskie osnovy i tekhnologicheskie osobennosti poluchenija melkodispersnykh poroshkov vysokojj chistoty // Naukoemkie tekhnologii. 2010. T. 11. № 11. S. 15−17.
15. Fedoseev I.V., Korzhavyjj A.P., Maramygin K.V. Obrazovanie almazov i drugikh uglerodnykh faz pri destrukcii karbonilnykh klasterov palladija // ZHurnal neorganicheskojj khimii. 2013. T. 58. № 12. S. 1586.
16. Zvoneckijj V.I., Korzhavyjj A.P., CHapajjkina L.A. i dr. Vlijanie sposoba poluchenija poroshkov volframa na svojjstva vtorichno-ehmissionnykh materialov // EHlektronnaja tekhnika. Ser. Materialy. 1990. № 3. S. 19−22.
17. Rosker Mark J. High frequency integrated vacuum electronics (HiFIVE). URL = http://www.darpa.mil/mto/solicitation/baa 07-49/pdf/amendment2.pdf.
18. Vikulov I. Kichaeva N. Vakuumnaja SVCH-ehlektronika v SSHA. Sostojanie i tendencii razvitija // EHlektronika: NTB. 2007. № 5. S. 66−71.
19. Li. I. Magnetrony impulsnogo dejjstvija - vse delo v katode // EHlektronika: NTB. 2012. № 5. S. 84−87.
20. Korzhavyjj A.P., Kapustin V.I., Kozmin G.V. Metody ehksperimentalnojj fiziki v izbrannykh tekhnologijakh zashhity prirody i cheloveka / Pod red. A.P. Korzhavogo. M.: Izd-vo MGTU im. N.EH. Baumana. 2012. 352 s.
21. Korzhavyjj A.P., Smelcov M.A. Lazernyjj analizator v metodakh issledovanija svojjstv mnogokomponentnykh zhidkikh sred // Naukoemkie tekhnologii. 2013. T. 14. № 7. S. 043−054.
22. Levush B. High aspect ratio electron beam, high efficiency interaction structure and high power amplifier design. URL = http://www.darpa.mil/mto/solicitation/baa 07-49/pdf/Beam_structure_Amplifier.pdf.
23. Djubua B.CH., Ermolov L.A., Esaulov N.P. i dr. EHlektronnaja ehmissija splavov Pt−Ba, Pd−Ba, Au−Ba // Radiotekhnika i ehlektronika. 1967. № 8. S. 1523.
24. Li I.P., Poljakov V.S.,Silaev A.D. i dr. Pressovannyjj metallosplavnojj palladijj barievyjj katod dlja magnetronov s beznakalnym zapuskom // EHlektronnaja tekhnika. Ser.1. SVCH-tekhnika. 2013. № 4. S170−175.
25. Fajjfer S.I., Korzhavyjj A.P., Zvoneckijj V.I. Metallokeramicheskie katodnye materialy dlja ehlektrovakuumnykh priborov // Poroshkovaja metallurgija. 1973. № 2. S. 101−106.