Improving the multi-criteria parts of electronic warfare products through the use of research results of optimization of the structure of the initial material
- 1 JSC “Central radio-research institute named after academician A.I. Berg” (Moscow, Russia)
Abstract
The object of research is the development of a mathematical model of material machinability that has the property of adequacy. The regularity connecting the workability and the structure of the material has been determined and experimentally confirmed. A theoretical and experimental substantiation of the choice of material processing modes leading to the formation of a material structure with specified properties has been made. A method for obtaining a part by organizing a sequence of technological actions has been tested, which makes it possible, regardless of technological heredity, to improve the physical and mechanical properties of the workpiece, which multi-criteria increases the reliability and durability of special and especially critical parts in the composition of electronic warfare products, and also improves the manufacturability of their manufacture.
- Received
- 04.04.2022
- Approved after review
- 11.04.2022
- Accepted
- 28.04.2022
How to cite
Крюков А.В. Применение многокритериального подхода для повышения качества деталей из состава изделий РЭБ // Радиотехника. 2022. Т. 86. № 5. С. 80−87. DOI: https://doi.org/10.18127/j00338486-202205-10
References
- Galkin V.I., Golovkin P.A., Volkov A.V., Krjukov A.V. Povyshenie kachestva korpusov mikrosborok jelektronnyh SVCh-priborov za schet optimizacii strukturnyh izmenenij. Vestnik RAEN. 2019. T. 19. №3. S. 36-41 (In Russian).
- Hadi O.Sh., Litvinov A.N. Ocenka tochnosti priblizhennogo metoda opredelenija dopustimogo davlenija dlja korpusov mikrosborok. Sb. tr. Mezhdunar. nauch.-praktich. konf. «Aktual'nye problemy sovremennogo mashinostroenija». Jurga: Jurginskij gos. un-t. 2014. S. 191-194 (In Russian).
- Kosilovoj A.G., Meshherekova R.K. Spravochnik tehnologa-mashinostroitelja. T. 2. M.: Mashinostroenie. 1986. 281 s. (In Russian).
- Grigor'ev S.N. i dr. Diagnostika avtomatizirovannogo proizvodstva. Pod red. S.N. Grigor'eva. M.: Mashinostroe-nie. 2011. 600 s. (In Russian).
- Gorenskij B.M., Lapina L.A., Ljubanova A.Sh. i dr. Modelirovanie processov i ob’ektov v metallurgii. Krasnojarsk: Sibirskij federal'nyj un-t. 2008. 145 s. (In Russian).
- Bokshtejn B.S., Kapeckij Ch.V., Shvindlerman L.S. Termodinamika i kinetika granic zeren v metallah. M.: Metallurgija. 1986. 224 s.
(In Russian). - Podinovskaja O.V., Podinovskij V.V. Analiz ierarhicheskih mnogokriterial'nyh zadach prinjatija reshenij metodami teorii vazhnosti kriteriev. M.: jelektronnyj resurs Math-Net.Ru. 2014. Vyp. 6. S. 2-8 (In Russian).
- Hadi O.Sh., Litvinov A.N. Modelirovanie naprjazhenno-deformirovannogo sostojanija korpusov mikrosborok v proces-se ih izgotovlenija i jekspluatacii. Dinamika i prochnost' (gl. 1). Izbrannye tr. Vseross. nauchn. konf. po problemam nauki i tehnologij. M.: RAN. 2013. S. 3-26 (In Russian).
- Petrovskij A.B., Rojzenzon G.V. Mnogokriterial'nyj vybor s umen'sheniem razmernosti prostranstva priznakov: mnogojetapnaja tehnologija PAKS. Iskusstvennyj intellekt i prinjatie reshenij. 2012. № 4. S. 88-103 (In Russian).
- Chapkova Ju.V. Ocenka vlijanija razmerov zon Gin'e–Prestona na uprochnenie aljuminievogo splava. Tula: Izvestija TGU. Ser. Tehnicheskie nauki. 2004. № 11. S. 138-141 (In Russian).
- sale@quantor.com (jelektronnyj resurs) (In Russian).
- Hauffe K. Reakcii v tverdyh telah i na ih poverhnosti. Ch. 1. Per. s nem. A.B. Shehter. M.: Izdatel'stvo inostran-noj literatury. 1962. 416 s. (In Russian).