350 руб
Журнал «Нанотехнологии: разработка, применение - XXI век» №1 за 2014 г.
Статья в номере:
Исследование свойств полимерных композиционных материалов на основе углеродных волокон и нанотрубок
Авторы:
А.П. Коржавый - д.т.н., профессор, зав. кафедрой промышленной экологии и химии, Калужский филиал МГТУ им. Н.Э. Баумана. E-mail: fn2kf@list.ru Б.М. Логинов - д.ф.-м.н., профессор, зав. кафедрой «Программное обеспечение ЭВМ, информационные технологии и прикладная математика» (ФН1-КФ), Калужский филиал МГТУ им. Н.Э. Баумана. E-mail: bmloginov@kaluga.ru М.Б. Логинова - ассистент, кафедра «Программное обеспечение ЭВМ, информационные технологии и прикладная математика» (ФН1-КФ), Калужский филиала МГТУ им. Н.Э. Баумана Ю.С. Белов - к.ф.-м.н., доцент, кафедра «Программное обеспечение ЭВМ, информационные технологии и прикладная математика» (ФН1-КФ), Калужский филиал МГТУ им. Н.Э. Баумана. E-mail: ybs82@mail.ru
Аннотация:
Рассмотрены современные методы синтеза и исследования свойств полимерных композиционных материалов армированных углеродными нанотрубками и волокнами. Систематизированы данные экспериментальных исследований, связанных с изучением влияния функционализации межфазных границ и концентрации углеродных образований на механические свойства и характеристики композиционных материалов на основе различных полимерных матриц.
Страницы: 34-46
Список источников

  1. Ding W., Eitan A., Fisher F.T., Chen X., Dikin D.A., Andrews R. Direct observation of polymer in carbon nanotube-polycarbonate composites // Nano Letters. 2003. V. 3. № 11. P. 1593-1599.
  2. Sander J.K.W., Pegel S., Cadek M., Cojny F., Es M., Lohmar J. A comparative study of melt spun polyamide-12 fifers reinforced with carbon nanotubes and nanofibers // Polymer. 2004. V. 45. № 6. P. 2001-2015.
  3. Bhattacharyya S., Sinturel C., Salvetat J.P., Saboungi M.L. Protein-functionalized carbon nanotube-polimer composites // Appl. Phys. Lett. 2005. V. 86. № 11. P. 113104-113110.
  4. Qian D., Dickey E.C., Andrews R., Rantell T. Load transfer and deformation mechanism in carbon nanotube-polysterene composites // Appl. Phys. Lett. 2000. V. 76. № 20. P. 2868-2870.
  5. Hwang G.L., Shieh Y.T., Hwang K.C. Efficient load transfer to polymer-grafted multiwalled carbon nanotubes in polymer composites // Adv. Funct. Mater. 2004. V. 14. № 5. P. 487-491.
  6. Eitan A., Fisher F.T., Andrews R., Brinson L.C., Schadler L.S.Reinforcement mechanisms in MWCNT-filled polycarbonate // Composites Science and Technology. 2006. V. 66. P. 1159-1170.
  7. Zhao X.D., Fan X.H., Chen X.F., Chai C.P., Zhou Q.F. Surface modification of multiwalled carbon nanotubes via nitroxide-mediated radical polymerization // Journal of Polymer Science: Part A Polymer Chemistry. 2006. V. 44. P. 4656-4667.
  8. Blake R., Gunko Y.K., Coleman J., Cadek M., Fonseca A., Nagy J.B. A generic organometallic approach toward ultra-strong carbon nanotube polimer composites // J. Am. Chem. Soc. 2004. V. 126. № 33. P. 10225-10233.
  9. Jia Z., Wang Z., Xu C., Liang J., Wei B., Wu D., Zhu S. Study on poly(methyl methacrylate)/carbon nanotube composites // Mater. Sci. Eng., A. 1999. V. 271. № 1-2. P. 395-400.
  10. Jin Z., Pramoda K., Goh S.H. Dynamic mechanical behavior of melt-processed multi-walled carbon nanotube/poly(methyl methacrylate) composites // Chem. Phys. Lett. 2001. V. 337. № 1-3. P. 43-47.
  11. Cooper C.A., Ravich D., Lips D., Mayer J., Wagner H.D. Distribution and alignment of carbon nanotubes and nanofibrils in a polymer matrix // Composites Science and Technology. 2002. V. 62. № 7-8. P. 1105-1112.
  12. Valasco-Santos C., Martinez-Hernandez A.L., Fisher F., Ruoff R., Castano V.M.Dynamical-mechanical and thermal analysis of carbon nanotube-methyl-ethyl methacrylate nanocomposites // J. Phys. D. Appl. Phys. 2003. V. 36. № 12. P. 1423-1428.
  13. Gorga R.E., Cohen R.E.Toughness enhancements in poly(methyl methacrylate) by addition of oriented multiwall carbon nanotubes // J. Polym. Sci. Part B: Polym. Phys. 2004. V. 42. № 14. P. 2690-2702.
  14. Sabba Y., Thomas E.L. High-concentration dispersion of single-wall carbon nanotubes // Macromolecules. 2004. V. 37. № 13. P. 4815-4820.
  15. Kim K.H., Jo W.H. Improvement of tensile properties of poly(methyl methacrylate) by dispersing multi-walled carbon nanotubes functionalized with poly(3-hexylthiophene)-graft-poly(methyl methacrylate) // Composites Science and Technology. 2008. V. 68. № 9. P. 2120-2124.
  16. Bae D.Y., Lee H.S. Enhanced compatibility of PC/PMMA alloys by adding multiwall carbon nanotubes // Carbon Letters. 2010. V. 11. № 2. P. 83-89.
  17. Kearns J.C., Shambaugh R.L. Polypropylene fibers reinforced with carbon nanotubes // J. Appl. Polym. Sci. 2002. V. 86. № 8. P. 2079-2084.
  18. Grady B.P., Pompeo F., Shambaugh R.L., Resasco D.E. Nucleation of polypropylene crystallization by single-walled carbon nanotubes // J. Phys. Chem. B. 2002. V. 106. № 23. P. 5852-5858.
  19. Manchado M.A.L., Valentini L., Biagiotti J., Kenny J.M. Thermal and mechanical properties of single-walled carbon nano-tubes-polypropylene composites prepared by melt processing // Carbon. 2005. V. 43. № 7. P. 1499-1505.
  20. Manchado M.A.L., Valentini L., Biagiotti J., Kenny J.M. Thermal and mechanical properties of single-walled carbon nanotubes-polypro­pylene composites prepared by melt processing // Carbon. 2005. V. 43. № 7. P. 1499-1505.
  21. Chang T.E., Jensen L.R., Kisliuk A., Pipes R.B., Pyrz R., Sokolov A.P.Microscopic mechanism of reinforcement in single-wall carbon nanotube/polypropylene nanocomposite // Polymer. 2005. V. 46. № 2. P. 439-444.
  22. McIntosh D., Khabashesku V.N., Barrera E.V. Benzoyl peroxide initiated in situ functionalization, processing, and mechanical properties of single-walled carbon nanotube−polypropylene composite fibers // J. Phys, Chem. C. 2007. V. 111. № 4. P. 1592-1600.
  23. Zhao P., Wang K., Yang H., Zhang Q., Du R., Fu Q. Excellent tensile ductility in highly oriented injection-molded bars of polypropyl­ene/carbon nanotubes composites // Polymer. 2007. V. 48. № 19. P. 5688-5695.
  24. Prashantha1 K., Soulestin J., Lacrampe M.F., Claes M., Dupin G., Krawczak P. Multi-walled carbon nanotube filled polypropylene nanocomposites based on masterbatch route: Improvement of dispersion and mechanical properties through PP-g-MA addition // eXPRESS Polymer Letters. 2008. V. 2. № 10. P. 735-745.
  25. Zhang W.D., Shen L., Phang I.Y., Liu T. Carbon nanotubes reinforced nylon-6 composite prepared by simple melt-compounding // Macromolecules. 2003. V. 37. P. 256-259.
  26. Liu T., Phang I.Y., Shen L., Chow S.Y., Zhang W.D. Morphology and mechanical properties of multiwalled carbon nanotubes reinforced nylon-6 composites // Macromolecules. 2004. V. 37. P. 7214-7222.
  27. Gao J., Itkis M.E., Yu A., Bekyarova E., Zhao B., Haddon R.C.Continuous spinning of a single-walled carbon nanotube-nylon composite fiber // J. Am. Chem. Soc. 2005. V. 127. P. 3847-3854.
  28. Zhao C., Hu G., Justice R., Schaefer D.W., Zhang S., Yang M., Han C.C.Synthesis and characterization of multi-walled carbon nanotubes reinforced polyamide 6 via in situ polymerization // Polymer. 2005. V. 46.№ 14. P. 5125-5132.
  29. Shao W., Wang Q., Wang F., Chen Y. The cutting of multi-walled carbon nanotubes and their strong interfacial interaction with poly­amide 6 in the solid state // Carbon. 2006. V. 44.№ 13. P. 2708-2714.
  30. Yang M., Gao Y., Li H., Adronov A. Functionalization of multiwalled carbon nanotubes with polyamide 6 by anionic ring-opening polymerization // Carbon. 2007. V. 45.№ 12. P. 2327-2333.
  31. Gong X., Liu J., Baskaran S., Voise R.D., Young J.S. Surfactant-as­sisted processing of carbon nanotube/polymer composites // Chem. Mater. 2000. V. 12. № 4. P. 1049-1052.
  32. Bai J.B., Allaoui A. Effect of the length and the aggregate size of MWNTs on the improvement efficiency of the mechanical and electrical properties of nanocomposites-experimental inves­tigation // Compos., Part A: Appl. Sci. Manuf. 2003. V. 34.№ 8. P. 689-694.
  33. Miyagawa H., Drzal L.T. Thermo-physical and impact properties of epoxy nanocomposites reinforced by single-wall carbon nanotubes // Polymer. 2004. V. 45.№ 15. P. 5163-5170.
  34. Gojny F.H., Wichmann M.H.G., Fiedler B., Schulte K. Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites - a comparative study // Composites Science and Technology. 2005. V. 65. P. 2300-2313.
  35. Guo P., Chen X., Gao X., Song H., Shen H. Fabrication and mechanical properties of well-dispersed multiwalled carbon nanotubes/epoxy composites // Composites Science and Technology. 2007. V. 67. P. 3331-3337.
  36. Liu L., Etika K.C., Liao K.S., Hess L.A., Bergbreiter D.E., Grunlan J.C. Comparison of covalently and noncovalently functionalized carbon nanotubes in epoxy // Macromol. Rapid Commun. 2009. V. 30.№ 8. P. 627-632.
  37. Spitalsky Z., Krontiras C.A., Georga S.N., Galiotis C. Effect of oxida­tion treatment of multiwalled carbon nanotubes on the mechanical and electrical properties of their epoxy composites // Compos. Part A: Appl. Sci. Manuf. 2009. V. 40. № 6-7. P. 778-783.
  38. Shaffer M.S.P., Windle A.H. Fabrication and characterization of carbon nanotube/poli(vinil alcohol) composites // Adv. Mater. 1999. V. 11. № 11. P. 937-941.
  39. Cadek M., Coleman J.N., Barron V., Hedicke K., Blau W.J. Morphological and mechanical properties of carbon-nanotube-reinforced semicrystalline and amorphous polymer composites // Appl. Phys. Lett. 2002. V. 81. № 27. P. 5123-5125.
  40. Cadek M., Coleman J.N., Ryan K.P.,Nicolosi V., Bister G., Fonseca A. Reinforcement of polymers with carbon nanotubes: the role of nanotube surface area // Nano Letters. 2004. V. 4. № 2. P. 353-356.
  41. Coleman J.N., Cadek M., Blake R., Nicolosi V., Ryan K.P., Belon C. High performance nanotube-reinforced plastics: understanding the mechanism of strength increase // Adv. Funct. Mater. 2004. V. 14. № 8. P. 791-798.
  42. Paiva M.C., Zhou B., Fernando K.A.S., Lin Y., Kennedy J.M., Sun Y.P.Mechanical and morphological characterization of polymer-carbon nanocomposites from functionalized carbon nanotubes // Carbon. 2004. V. 42. № 14. P. 2849-2854.
  43. Safadi B., Andrews R., Grulke E.A. Multiwalled carbon nanotube polymer composites: synthesis and characterization of thin films // J. Appl. Polym. Sci. 2002. V. 84. № 14. P. 2660-2669.
  44. Thostenson E.T., Chou T.W. Aligned multi-walled carbon nanotube-reinforced composites: processing and mechanical characterization // J. Phys. D: Appl. Phys. 2002. V. 35. № 16. P. L77-L80.
  45. Choi H.J., Zhang K., Lim J.Y. Multi-walled carbon nanotube/polystyrene composites prepared by in-situ bulk sonochemical polymerization // J. Nanosci. Nanotechnol. 2007. V. 10. P. 3400-3403.
  46. Jiaa Y., Jiang Z., Peng J., Gonga X., Zhang Z. Resistance to time-dependent deformation of polystyrene/carbon nanotube composites under cyclic tension // Composites: Part A. 2012. V. 43. P. 1561-1568.
  47. Fornes T.D., Baur J.W., Sabba Y., Thomas E.L. Morphology and properties of melt-spun polycarbonate fibers containing single-and multi-wall carbon nanotubes // Polymer. 2006. V. 47. P. 1704-1714.
  48. Kanagaraj S., Varanda F.R., Zhiltsova T.V., Oliveira M.S.A., Simoes J.A.O. Mechanical properties of high density polyethylene/carbon nanotube composites // Composites Science and Technollogy. 2007. V. 67. № 15-16. P. 3071-3077.
  49. Xu M., Zhang T., Gu B., Wu J., Chen Q. Synthesis and properties of novel polyurethane−urea/multiwalled carbon nanotube compos­ites // Macromolecules. 2006. V. 39. № 10. P. 3540-3545.
  50. Ogasawara T., Ishida Y., Ishikawa T., Yokota R. Characterization of multi-walled carbon nanotube/phenylethynyl terminated poly­imide composites // Compos. Part A. Appl. Sci. Manuf. 2004. V. 35. № 1. P. 67-74.
  51. Kearns J.C., Shambaugh R.L. Polypropylene fibers reinforced with carbon nanotubes // Journal of Applied Polymer Science. 2002. V. 86.№ 8. P. 2079-2084.
  52. Sandler J.K.W., Pegel S., Cadek M., Gojny F., Es M., Lohmar J., Blau W.J., Schulte K., Windle A.H., Shaffer M.S.P. A comparative study of melt spun polyamide-12 fibres reinforced with carbon nanotubes and nanofibres // Polymer. 2004. V. 45. № 6. P. 2001-2015.
  53. Iwahori Y., Ishiwata S., Sumizawa T., Ishikawa T. Mechanical properties improvement in two-phase and three-phase composites using carbon nano fiber dispersed resin // Composite, Part A: Applied Science and Manufacturing. 2005. V. 36. № 10. P. 1430-1439.
  54. Lam C.K., Cheung H.Y., Ling H.Y., Lau K.T. Effects of ultrasound sonication in nanoclay clusters of nanoclays/epoxy composites // Mater. Lett. 2005. V. 59.№ 11. P. 1369-1372.
  55. Zhou Y., Pervin F., Rangari V.K., Jeelani S. Fabrication and evaluation of carbon nano fiber filled carbon/epoxy composite // Materials Science and Engineering: A. 2006. V. 426. № 1-2. P. 221-228.
  56. Zhou Y., Pervin F., Rangari V.K., Jeelani S. Influence of montmorillonite clay on the thermal and mechanical properties of conventional carbon fiber reinforced composites // Journal of Materials Processing Technology. 2007. V. 191. № 1-3. P. 347-351.
  57. Zhou Y., Pervin F., Jeelani S., Mallick P.K. Improvement in mechanical properties of carbon fabric - epoxy composite using carbon nanofibers // Journal of Materials Processing Technology. 2008. V. 198. № 1-3. P. 445-453.
  58. Mago G., Kalyon D.M., Fisher F.T.Polymer crystallization and precipitation-induced wrapping of carbon nanofibers with PBT // Journal of Applied Polymer Science. 2009. V. 114. P. 1312-1319.
  59. Modi S.H., Dikovics K.B., Gevgilili H., Magoc G., Bartolucci S.F., Fisher F.T., Kalyon D.M. Nanocomposites of poly(ether ether ketone) with carbon nanofibers: Effects of dispersion and thermo-oxidative degradation on development of linear viscoelasticity and crystallinity // Polymer. 2010. V. 51. P. 5236-5244.
  60. Mago G., Kalyon D.M., Fisher F.T. Nanocomposites of polyamide-11 and carbon nanostructures: Development of microstructure and ultimate properties following solution processing // Journal of Polymer Science: Part B Polymer Physics. 2011. V. 49. P. 1311-1321.