350 rub
Journal Nanotechnology : the development , application - XXI Century №3 for 2016 г.
Article in number:
Microstrip line made by plotter printing ink containing silver nanoparticles, its frequency and impulse response
Keywords: additive technology in electronics plotter ink comprising silver nanoparticles microstrip transmission line
Authors:
A.E. Zdrok - Post-gradate Student, Tomsk State University of Control Systems and Radioelectronics. E-mail: kundep@mail.ru D.V. Sherstjuk - Student, Tomsk State University of Control Systems and Radioelectronics. E-mail: antineitrino078@gmail.com A.M. Umarov - Student, Tomsk State University of Control Systems and Radioelectronics. E-mail: umarov.anton@mail.ru S.A. Artishchev - Ph.D. (Eng.), Junior Research Scientist, Tomsk State University of Control Systems and Radioelectronics. E-mail: 824tusur@mail.ru A.G. Loschilov - Ph.D. (Eng.), Head of the Chair CUDR, Tomsk State University of Control Systems and Radioelectronics. E-mail: yogl@mail.ru N.D. Malyutin - Dr.Sc. (Eng.), Director of the Research Institute, Tomsk State University of Control Systems and Radioelectronics. E-mail: ndm@main.tusur.ru
Abstract:
In article we consider the use of plotter to print by ink containing silver nanoparticles for the manufacture of microstrip lines. A brief description of developed plotter and its using for forming conductors on the surface of dielectric substrate is presented. Experimental parameters of investigated microstrip transmission line which was manufactured by means of plotter are given. Reflektogram of microstrip transmission line at impact of an impulse with the front 40 ps is received.
Pages: 3-8
References

 

  1. Reinhold I., Hendriks C.E., Eckardt R., Kranenburg J.M., Perelaer J., Baumann R.R., Schubert U.S. Argon plasma sintering of ink jet printed silver track sonpolymer substrates // Journal of Materials Chemistry 19. 2009. № 21. P. 3384-3388.
  2. Wünscher S., Rasp T., Grouchko M., Kamyshny A., Paulus R.M., Perelaer J., Kraft T., Magdassi Sh., Schubert U.S. Simulation and prediction of the thermal sintering behavior for a silver nanoparticle ink based on experimental input // Journal of materials chemistry. C, Materials for optical and electronic devices. 2014. V. 2. № 31. R. 6342-6352.
  3. Kablov E. Primenenie 3D printerov v promyshlennosti. Additivnye tekhnologii: perspektivy 3D pechati v promyshlennosti // Atomnyjj ehkspert. 2014. № 5-6. S. 56-61.
  4. Sangkil Kim et al. Inkjet-printed antennas, sensors and circuits on paper substrate // IET Microwaves, Antennas & Propagation. 2013. № 10. R. 858-868.
  5. Moro R. et al. Novel Inkjet-Printed Substrate Integrated Waveguide (SIW) Structures on Low-Cost Materials for Wearable Applications // Microwave Conference (EuMC). 2012. R. 72-75.
  6. Azucena O. et al. Inkjet printing of passive microwave circurity // Microwave Symposium Digest. 2008. R. 1075-1078.
  7. Li Yang et al. RFID Tag and RF Structures on a paper substrate using inkjet-printing technology // IEEE Transactions on microwave theory and techniques. 2007. 55 p.
  8. Efremov A.A., Kokhtina JU.V., Nisan A.V., Pavlov N.I. Pechatnaja ehlektronika. M.: Izd-vo ZAO «NIIIT». 2013. 56 s.
  9. Tuev V.I., Maljutin N.D., Kopylova T.N. i dr. Razvitie additivnykh printernykh tekhnologijj v ehlektronike / Pod. red. prof. N.D. Maljutina. Tomsk: Tomsk. gos. un-t sistem upr. i radioehlektroniki, 2015.  69 s.
  10. Tuev V.I., Maljutin N.D., Kopylova T.N. et al. Evolution of additive printer technology in electronics: thin film manufacturing of organic semiconductors, metal conductors, dielectrics and educational resources on their basis // Conference Proceedings. 2015. 25th Int. Crimean Conference «Microwave & Telecommunication Technology» (CriMiCo-2015). 6-12 September. Sevastopol, Crimea. P. 679-682.
  11. Larson B.J., Gillmor S.D., Lagally M.G. Controlled deposition of picoliteramounts of fluid using an ultrasonically driven micropipette // Review of Scientific Instruments. 2004. № 75. R. 832-836.
  12. Larson B.J. New technologies for fabricating biological microarrays: Ph.D. thesis. University of Wisconsin-Madison. 2005.
  13. Patent: 6,874,699 US Int.cl. B05B 1/08. Methods and apparata for precisely dispensing microvolumes of fluids / B.J. Larson, C.H. Lee, A. Lal, M.G. Lagally. data of Patent 05.04.2005.
  14. Kokolov A.A., Babak L.I. Methodology of Built and Verification of Non-Linear EEHEMT Model for GaN HEMT Transistor // Radioelectronics and communications systems. 2015. V. 58. № 10. P. 435-443.
  15. Fusco V.F. Microwave Circuits. Analysis and Computer-Aided Design. 1990. Moscow: Radio i svyas (rus.).
  16. Artishchev S.A., Zdrok A.E., Loschilov A.G., Maljutin N.D. Analysis of influence of annealing parameters on electrical resistance of printed electronics elements // Microwave & Telecommunication Technology (CriMiCo). 2014. 24th International Crimean Conference. Sevastopol. 2014. P. 690-691 (engl., rus.). DOI: 10.1109/CRMICO.2014.6959587. IEEE Conference Publications.
  17. Tuev V.I., Maljutin N.D., Loshhilov A.G., Artishhev S.A., Zdrok A.E., Allanurov A.M., Bombizov A.A., Karaulnykh S.P., Makarov I.M., Ubajjchin A.V. Issledovanie vozmozhnostejj primenenija additivnojj printernojj tekhnologii formirovanija plenok organicheskikh i neorganicheskikh materialov ehlektroniki // Doklady TUSURa. 2015. № 4(38). S. 52-63.