350 rub
Journal Electromagnetic Waves and Electronic Systems №5 for 2016 г.
Article in number:
Effect of doping oxygen of the oxide layer formed on the surface of the titanium rod, the properties of the products for the radar
Keywords: titanium alloys bars welding oxide oxygen hardness slewing bearings radar systems
Authors:
V.K. Shatalov - Dr. Sc. (Eng.), Professor, Kaluga branch of the Bauman MSTU. E-mail: vkshatalov@yandex.ru A.P. Korzhavyi - Dr. Sc. (Eng.), Professor, Kaluga branch of the Bauman MSTU. E-mail: fn2kf@list.ru
Abstract:
We describe a new technology in the manufacture of surfaces of titanium alloy and radar antenna assemblies that are resistant to the effects of flue gas and seawater. The proposed method of fusing titanium layer showed a clear pre-property. It was found that the material argon-arc weld process with consumable electrode wire filler treated before it in a micro-arc oxidation, structure, quality, hardness and wear resistance in combination surpasses all known titanium covering intended for use in corrosive environments. The use of wires with a film obtained in the process of micro-arc oxidation, leads to the change of chemical composition, phase com-position and structure of the deposited wear resistant coating. Discussed in detail the resulting microstructure and physical properties of titanium coating, with high resolution and accuracy of analytical equipment. Specify features of the new technology of titanium coatings, as well as their use for the manufacture of components and radar units.
Pages: 11-18
References

 

  1. Malyshev A.V. Organizacija proizvodstva detalejj oporno-povorotnykh ustrojjstv iz titanovykh splavov na predprijatijakh radioehlektronnojj promyshlennosti. Avtoref. dis. - kand. tekhn. nauk. M.: 2009. 16 s.
  2. EHnciklopedija investora. http://investments.academic.ru/1448/Titan.
  3. Boyer R., Weisch G., Collings E. Materials properties handbook: titanium alloys // Metalls Park. Ohio: ASM Int. 1994. 1176 p.
  4. Kudojarov B.V., Mironova N.V., Nikolaev A.A., SHmyrev JU.N. Tekhnologija naplavki uplotnitelnykh poverkhnostejj sudovojj armatury iz splavov titana // Sudostroitelnaja promyshlennost. 1990. № 10. S. 36−39.
  5. Leonov V.P., Mikhajjlov V.I., Groshev A.L., SHatalov V.K. i dr. Novye materialy dlja vypolnenija naplavok na detali sudovojj armatury iz titanovykh splavov glubokovodnykh transportnykh sistem // Voprosy materialovedenija. 2015. № 1(81). S. 263−268.
  6. Fatiev I.S., SHatalov V.K., Mikhajjlov V.I., Vasin S.A. i dr. Svojjstva antifrikcionnykh naplavok na titanovye splavy oksidirovannymi prisadochnymi prutkami // Naukoemkie tekhnologii. 2013. № 7. S. 35−42.
  7. SHatalov V.K., Fatiev I.S., Mikhajjlov V.I., Groshev A.L. Antifrikcionnye naplavki na titanovye splavy // Nauka i obrazovanie (MGTU im. N.EH. Baumana, ehlektronnyjj zhurnal). 2012. № 5. http://technomag.bmstu.ru/doc/383721.html.
  8. Gordienko P.S., Gnedenkov S.V. Migrodugovoe oksidirovanie titana i ego splavov. Vladivostok: Dalnauka. 1997. 179 s.
  9. SHatalov V.K., Fatiev I.S., SHHerbinin V.F., Mikhajjlov V.I. i dr. Vlijanie mikrodugovogo oksidirovanija prisadochnojj provoloki na iznosostojjkost naplavok na titan // Sb. materialov VNTK «Naukoemkie tekhnologii v priboro- i mashinostroenii i razvitie innovacionnojj dejatelnosti v VUZe». M.: Izd-vo MGTU im. N.EH. Baumana. 2009. T. 1. S. 4−6.
  10. Leokha F.L., Ratiev S.N. Sovremennye sposoby poluchenija splavov titana legirovannykh kislorodom // Sb. nauch. trudov DonNTU 2012. Ser. Metallurgija.
  11. CHernenga D.F., Bjalik O.M., Ivanchuk D.F i dr. Gazy v cvetnykh metallakh i splavakh. M.: Metallurgija. 1982. 178 s.
  12. Fizicheskoe metallovedenie. Fazovye prevrashhenija. Metallografija / Pod red. R. Kana. M: Mir. 1968. № 2. 490 s.
  13. Kozlov I.V., Mikhajjlov V.I., Semjonov V.A., KHromushkin K.D. i dr. Issledovanie kachestva oksidirovannogo titanovogo splava PT-7M, naplavlennogo s primeneniem vysokotemperaturnojj prokatki // Voprosy materialovedenija. 2007. № 3(51). S. 214−217.
  14. Kolachev B.A., Elagin V.I., Livanov V.A. Metallovedenie i termicheskaja obrabotka cvetnykh metallov i splavov. M.: MISIS. 1999. 416 s.
  15. Krishtal M.M., Ivashin P.V., JAsnikov I.S., Polunin A.V. Vlijanie dobavok nanorazmernykh chastic SiO2 v ehlektrolit na sostav i morfologiju oksidnykh sloev, formiruemykh pri mikrodugovom oksidirovanii splava AK6M2 // Metallovedenie i termicheskaja obrabotka metallov. 2015. № 7. S. 62−69.
  16. Korzhavyjj A.P., Marin V.P., JArancev N.V. Tekhnologii gorjachego i kholodnogo plakirovanija v priborostroenii // Naukoemkie tekhnologii. 2003. T. 4. № 2. S. 26.
  17. Ivanov O.G., Korzhavyjj A.P. Svojjstva amorfnykh magnitomjagkikh splavov tipa AMAG // Naukoemkie tekhnologii. 2002. T. 3. № 5. S. 24.
  18. Leyens C., Peters M. Titanium and titanium alloys. NJ: Wiley-VCH. 2013. 514 p.