350 rub
Journal Electromagnetic Waves and Electronic Systems №3 for 2016 г.
Article in number:
Modeling the physical process of receiving microprofiles for electronic devices
Keywords: mathematical model drawing with sliding a microwire the analysis of processes aluminium alloys a graphic method of revealing of distinctions of algebraic functions technological process of manufacture
Authors:
A.V. Volkov - Ph. D. (Eng.), Associate Professor, Kaluga branch of the Bauman MSTU. E-mail: volkovkfmgtu@yandex.ru I.K. Ustinov - Ph. D. (Eng.), Head of Department, Kaluga branch of the Bauman MSTU. E-mail: m4kf-kafedra@rambler.ru A.P. Korzhavyy - Dr. Sc. (Eng.), Professor, Kaluga branch of the Bauman MSTU. E-mail: fn2kf@list.ru S.S. Strelchenko - Dr. Sc. (Eng.), Professor, Kaluga branch of the Bauman MSTU. E-mail: stas40@kaluga.ru
Abstract:
Describes the features of the physical processes occurring during the drawing with the slide wires of the aluminum-silicon alloy. Re-search done by analyzing the mathematical model of the process. In the process of implementation of the developed method of analysis of discrete mathematical models of processes of repeated drawing, including graphic identification of the algebraic functions that implement the original approach to the task in the model deviations from the nominal dimensions of the fiber. The model is constructed for use in improving the technique of multiple drawing with slipping of the microprofile made of plastic metals and alloys, such as aluminum alloys. The model was created in Mathcad results in graphic mode in two-and three-dimensional space, and if you use software Paint. Modeled the collection of the microprofile from the aluminum-silicon alloy in the process, consisting of twenty-one transition, which takes into account the technical parameters of the drawing mill type SG5 firms by Niehoff, Germany. Data obtained as a result of performing these studies are of interest to researchers, engineers involved in mathematical modeling of physical-technological processes.
Pages: 13-18
References

 

  1. Korzhavyi A.P.Advancedmetallicmaterialsforvacuumdevices // JournalofAdvancedMaterials. 1994. V. l. P. 46.
  2. Bondarenko G.G., ZHdanov S.M., Korzhavyjj A.P. Osobennosti poluchenija i issledovanija platinovykh ehmitirujushhikh kompozicijj // Perspektivnye materialy. 1999. № 4. S. 19.
  3. Bondarenko G.G., ZHdanov S.M., Korzhavyjj A.P., Tikhonov A.N. Povedenie metallicheskikh kompozicijj na osnove medi i aljuminija v uslovijakh dlitelnojj ionno-ehlektronnojj bombardirovki // Perspektivnye materialy. 1999. № 3. S. 29.
  4. Bondarenko G.G., Korzhavyjj A.P., CHistjakov G.A.Povedenie kompozicionnykh kholodnykh katodov na osnove aljuminija v tlejushhem razrjade // Metally. 2005. № 3. S. 90−95.
  5. Korzhavyjj A.P., Loginov B.M., Loginova M.B., Belov JU.S. Issledovanie svojjstv polimernykh kompozicionnykh materialov na osnove uglerodnykh volokon i nanotrubok // Nanotekhnologii: razrabotka, primenenie - XXI vek. 2014. T. 6. № 1. S. 34−46.
  6. Korzhavyjj A.P., CHelenko A.V., Marin V.P., Savchenko V.P. Fiziko-tekhnicheskie i ehkonomicheskie aspekty obespechenija kachestva izdelijj radioehlektroniki // Kachestvo i zhizn. 2015. № 2(6). S. 38−44.
  7. Korzhavyjj A.P., Marin V.P., JArancev N.V. Tekhnologii gorjachego i kholodnogo plakirovanija v priborostroenii // Naukoemkie tekhnologii. 2003. T. 4. № 2. S. 26.
  8. Perlin I.L., Ermanok M.Z. Teorija volochenija. M.: Mashinostroenie. 1971. 2-e izd. 448 s.
  9. KHerkhager M., Partoll KH. Mathcad 2000: polnoe rukovodstvo / Per. s nem. Kiev: BHV. 2000. 416 c.
  10. Bondarenko G.G., Volkov A.V. Razrabotka i realizacija modeli processa mnogokratnogo volochenija mikroprovoloki // Naukoemkie tekhnologii. 2002. T. 3. № 5. S. 19−23.
  11. Bondarenko G.G., Volkov A.V. Sovershenstvovanie modeli volochenija mikroprovoloki // Naukoemkie tekhnologii. 2004. T. 5. № 1. S. 14−18.
  12. Bondarenko G.G., Volkov A.V. Sovershenstvovanie modeli volochenija mikroprovoloki // Naukoemkie tekhnologii. 2005. T. 6. № 3−4. S. 34−38.
  13. Korn G., Korn T. Spravochnik po matematike dlja nauchnykh rabotnikov i inzhenerov / Per. s angl. pod red. I.G. Agranovicha. Izd. 4-e. M.: Nauka. 1978. 832 s.