Experimental verification of calculation results of transmission characteristics of waveguide transitions with a rectangular cross-section obtained by the method of integral equations
- 1 Postgraduate Student, Department of Physics and Technology of Optical Communication, Nizhny Novgorod State Technical University n.a. R.E. Alekseev
- 2 Ph.D. (Eng.), Department of Physics and Technology of Optical Communication, Nizhny Novgorod State Technical University n.a. R.E. Alekseev; Senior Research Scientist of FRPC “Measuring System Research Institute n.a. Yu.Ye. Sedakov” (Nizhny Novgorod)
- 3 Honored Scientist of RF, Dr.Sc. (Eng.), Professor of Department of Physics and Technology of Optical Communication, Nizhny Novgorod State Technical University n.a. R.E. Alekseev A. Yu. Sedakov – Dr.Sc. (Eng.), Associate Professor of Department of Physics and Technology of Optical Communication, Nizhny Novgorod State Technical University n.a. R.E. Alekseev; Director of FRPC “Measuring System Research Institute n.a. Yu.Ye. Sedakov” (Nizhny Novgorod)
Keywords:
method of integral equationsLorentz lemmawaveguide transitiontransmission characteristicsmethod of electrical erosionmeasuring bench
Abstract
The technology of manufacturing of waveguide transitions with a rectangular cross-section using the method of electric erosion has been considered. The results of theoretical calculation of transmission characteristics of shielded matching transitions have been verified by comparing them with the experimental results. The results of the theoretical calculation have been obtained by using the method of integral equations based on the integral form of the Lorentz lemma.
How to cite
Гаранин С.М., Данилов И.Н., Седаков А.Ю. Экспериментальная проверка результатов расчета характеристик передачи волноводных переходов прямоугольного поперечного сечения, полученных методом интегральных уравнений // Антенны. 2017. № 12. С. 62–67.
References
- Garanin S.M., Danilov I.N., Novoselova N.A. Raschet plavnykh perekhodov mezhdu pryamougol'nymi nesoosnymi volnovodami // Antenny. 2017. № 4. S. 55–61.
- Raevskij S.B. Metod integral'nykh uravnenij dlya rascheta neregulyarnykh volnovodov // Fizika volnovykh protsessov i radiotekhnicheskie sistemy. 2009. T. 12. № 3. S. 34–37.
- Nemilov E.F. E'lektroe'rozionnaya obrabotka materialov. L.: Mashinostroenie. 1983.
- Anur'ev V.I. Spravochnik konstruktora-mashinostroitelya. T. 1 / Pod red. I.N. Zhestkovoj. Izd. 8-e, pererab. i dop. M.: Mashinostroenie. 2001.
- Foteev N.K. Tekhnologiya e'lektroe'rozionnoj obrabotki. M.: Mashinostroenie. 1980.
- Levinson E.M. E'lektroe'rozionnaya obrabotka metallov. L.: Lenizdat. 1961.
- Danilov I.N. Metod integral'nykh uravnenij dlya rascheta neregulyarnykh uchastkov e'kranirovannykh volnovodov. Diss. … kand. tekhn. nauk. N. Novgorod. 2015.
- Khibel' M. Osnovy vektornogo analiza tsepej. M.: Izdatel'skij dom ME'I. 2009.
- Neganov V.A., Osipov O.V., Raevskij S.B., Yarovoj G.P. E'lektrodinamika i rasprostranenie radiovoln. Ucheb. posobie / Pod red. V.A. Neganova i S.B. Raevskogo. Izd. 3-e, dop. i pererab. M.: Radiotekhnika. 2007.