V.Yu. Ilyichev1, P.A. Terekhov2

1 Bauman Moscow State Technical University, Kaluga Branch (Kaluga, Russia)
2 PAO Kaluga Turbine Plant (Kaluga, Russia)
1 patrol8@yandex.ru, 2 terehov_pavel@bk.ru

The article deals with the problem of investigating the mechanism of occurrence of variable forces and moments in the connection of shafts with toothed couplings when the shaft axes are misaligned. In turbine units, gear couplings are used to connect the shafts of engines (turbines) and drive units such as compressors and pumps. Since in this case the connected rotors of the installations have thrust bearings, gear couplings ensure mutual displacement of the shafts, which occurs due to their thermal linear expansion, force influences, displacement of supports and other reasons. Gear couplings with an intermediate gear shaft have become the most widespread in turbine construction. The accumulated extensive experience in the design, manufacture and operation of toothed joints allows you to create coupling designs that provide a long service life and withstand heavy loads. It should be noted that it is not easy to reduce the mutual influence of shafts connected by such a coupling, because for this you need to greatly reduce the length of the teeth to reduce.

Ilyichev V.Yu., Terekhov P.A. The effect of misalignment of shaft axes connected by toothed couplings on the vibration activity of rotary turbine systems. Science Intensive Technologies. 2024. V. 25. № 4. P. 40−47. DOI: https://doi.org/ 10.18127/j19998465-202404-04 (in Russian)

1. Slobodyanskij M.G. Ocenka vozmozhnosti obespecheniya trebuemogo urovnya dolgovechnosti zubchatyh muft na osnove modelirovaniya processa ih povrezhdaemosti. V sb.: Uchenye Omska – regionu. Materialy V Regional'noj nauchno-tekhnicheskoj konferencii. Pod obshch. red. L.O. Shtriplinga. Omsk, 2020. S. 101–106 (in Russian).
2. Il'ichev V.Yu., Zhukov Ya.D. Issledovanie dinamiki rotornyh sistem s uchetom vliyaniya soedinitel'nyh muft. V sb.: Razvitie sovremennoj nauki i tekhnologij v usloviyah transformacionnyh processov. Sbornik materialov Mezhdunarodnoj nauchno-prakticheskoj konferencii. M. 2022. S. 73–79 (in Russian).
3. Shemshura B.A., Lichkovaha A.S. Vliyanie vosstanavlivayushchego momenta na uglovye kolebaniya. V sb.: Transport: nauka, obrazovanie, proizvodstvo. Sb. nauchnyh trudov Mezhdunar. nauch.-prakt. konf. Rostov-na-Donu. 2021. S. 333–337 (in Russian).
4. Il'ichev V.Yu., Yurik E.A. Issledovanie mekhanizma vozniknoveniya kolebanij v zubchatyh muftah pri rascentrovkah osej soedinyaemyh valov. Elektronnyj zhurnal: nauka, tekhnika i obrazovanie. 2018. № 1 (17). S. 6–14 (in Russian).
5. Nasonov D., Ilichev V., Raevsky V. The experimental study of elastic-hysteresis properties of rubber elements of sleeve-pin couplings. V sb.: Vibroengineering PROCEDIA. Proceedings of the 52th Inter-national JVE Conference in St. Petersburg. 2021. S. 193–197.
6. Belkov V.A., Maksimov V.A. Chislennoe issledovanie harakteristik zubchatyh muft vysokoskorostnyh turbomashin. Vestnik Kazanskogo tekhnologicheskogo universiteta. 2012. T. 15. № 8. S. 254–256 (in Russian).
7. Zhirkin Y., Puzik Y., Slavin V., Terentyev D. Investigation of interaction of carbonitrided teeth friction surfaces in gear wheels. Journal of Chemical Technology and Metallurgy. 2017. V. 52. № 4. P. 655–658.
8. Samarskij A.A., Vabishchevich P.N. Vychislitel'naya teploperedacha. M.: Editorial URSS. 2003. 784 s. (in Russian)