Radiotekhnika
Publishing house Radiotekhnika

"Publishing house Radiotekhnika":
scientific and technical literature.
Books and journals of publishing houses: IPRZHR, RS-PRESS, SCIENCE-PRESS


Тел.: +7 (495) 625-9241

 

Study of elastocaloric effect in Ti<sub>2</sub>NiCu melt spun ribbons for a solid-state cooling

Keywords:

V.V. Koledov - Dr.Sc. (Phys.-Math.), Leading Research Scientist, Kotelnikov IRE RAS (Moscow) E.V. Morozov - Leading Engineer, Kotelnikov IRE RAS (Moscow) S.Y. Fedotov – Engeneer, Kotelnikov IRE RAS (Moscow) V.G. Shavrov - Dr.Sc. (Phys.-Math.), Head of Laboratory, Kotelnikov IRE RAS (Moscow) A.V. Shelyakov – Ph.D. (Phys.-Math.), Head of Laboratory, MEPhI


This paper is devoted to the experimental study of the elastocaloric effect (ECE) in melt spun ribbon Ti2NiCu alloy at the periodic action of the tensile force. The maximum value of ECE observed at an initial temperature of 52 °C, elongation of 1,5% and a frequency of 0.2 Hz cycles was found to be 7,5 oC. With increasing frequency from 0.2 Hz to 4 Hz the ECE falls in magnitude. The specific power density of the sample was estimated.
References:

 

  1. Haussühl S. Physical Properties of Crystals: an Introduction. John Wiley & Sons. 2008.
  2. Guyomar D. et al. Elastocaloric modeling of natural rubber // Applied Thermal Engineering. 2013. № 57. R. 33-38.
  3. Morozov E.V., Kuchin D.S., Koledov V.V. i dr. // ZHTF. 2016. T. 11. № 75 (v pechati).
  4. Bechtold C., Chluba C., Lima R., et al. // Applied Physics Letters. 2012. № 101. R. 091903.
  5. Ossmer H., et al. Materials Today // Proceedings 2S. 2015. R. 971–974.

 

June 24, 2020
May 29, 2020

© Издательство «РАДИОТЕХНИКА», 2004-2017            Тел.: (495) 625-9241                   Designed by [SWAP]Studio